[1]宛张洪,蔡洪涛,顾尚潮,等.一种高温法兰连接系统设计方法[J].石油化工设备,2025,54(02):38-41.[doi:10.3969/j.issn.1000-7466.2025.02.007]
　WAN Zhang-hong,CAI Hong-tao,GU Shang-chao,et al.A Design Method for High-temperature Flange Connection system[J].Petro-Chemical Equipment,2025,54(02):38-41.[doi:10.3969/j.issn.1000-7466.2025.02.007]
点击复制

一种高温法兰连接系统设计方法()
分享到：

石油化工设备[ISSN:1000-7466/CN:62-1078/TQ]

卷:
54
期数:
2025年02期
页码:
38-41
栏目:
设计计算
出版日期:
2025-03-25

文章信息/Info

Title:
A Design Method for High-temperature Flange Connection system
文章编号:
1000-7466(2025)02-0038-04
作者:
宛张洪; 蔡洪涛; 顾尚潮; 李晓辉
武汉工程大学 机电工程学院，湖北 武汉 430074
Author(s):
WAN Zhang-hong;  CAI Hong-tao;  GU Shang-chao;  LI Xiao-hui
School of Mechanical and Electrical Engineering, Wuhan Institute of Technology, Wuhan 430074,China
关键词:
高温法兰; 蠕变; 应力松弛; 改进; 设计
Keywords:
high-temperature flange ;  creep;  stress relaxation;  improvement; design
分类号:
TQ050.2
DOI:
10.3969/j.issn.1000-7466.2025.02.007
文献标志码:
A
摘要:
高温对螺栓（螺柱）法兰连接系统的影响包括法兰性能下降、垫片和螺栓（螺柱）材料性能的降低、热膨胀和蠕变。这些影响导致预紧时垫片上的密封比压降低，使得系统密封性下降。其中螺栓（螺柱）蠕变、热膨胀造成螺栓（螺柱）应力松弛，是导致法兰连接系统泄漏的主要因素之一。因此提出了一种通过降温、降应力从而延缓螺栓（螺柱）材料蠕变速度的措施。主要是利用中空螺栓（螺柱）和较大直径螺栓（螺柱）实现降温和降应力目的，并给出了详细的设计步骤。
Abstract:
The effects of high temperature on bolted flange joints include material degradation, thermal expansion, and creep of flanges, gaskets, and bolts. These effects lead to a decrease in the sealing pressure on the gasket during the pre?鄄tightening condition, resulting in a decrease in the sealing performance of the system. Bolt stress relaxation caused by bolt creep and thermal expansion is one of the major factors leading to leakage of bolted flanged joints. A measure based on cooling and stress reduction has been proposed to delay the creep rate of bolt materials. The use of hollow bolts and larger diameter bolts to achieve the purpose of cooling and stress reduction and detailed design steps were provided with design details and steps.

参考文献/References:

［1］ 董晓敏，赵海杰.烟气管道的高温蠕变应力分析［J］．当代化工，2014,43(7):1208－1211．
DONG X M,ZHAO H J. Creep stress analysis of flue gas pipeline［J］.Contemporary chemical industry,2014,43(7):1208-1211.
［2］ 王志坤，张昕，宋运通，等.预紧碟簧在炼油装置的应用［J］．润滑与密封，2006,174(2):184-185，195.
WANG Z K,ZHANG X,SONG Y T,et al. Application of pre-loaded disc springs in oil refining units［J］．Lubrication engineering,2006,174(2):184-185,195.
［3］ 程学君，李应力，满艳茹，等.预紧碟簧在加氢高压换热器上的应用［J］.润滑与密封，2009,34(6):111－113.
CHENG X J, LI Y L, MAN Y R,et al. Application of preload disc spring in the high-pressures hydrogenation heater exchanger［J］.Lubrication engineering，2009,34(6):111－113.
［4］ 董智，仇性启，赵宗彬.延迟焦化装置中带碟簧的管法兰接头三维数值分析［J］.压力容器，2011,28(5):15-20.
DONG Z，QIU X Q，ZHAO Z B. Three－dimensional numerical analysis for the pipe flanged joint with belleville spring in delayed coking unit［J］.Journal of pressure vessel technology,2011,28(5):15-20.
［5］ 王修慧,李慧芳,钱才富.金属缠绕垫片结构参数对压缩-回弹性能的影响［J］.计算机辅助工程,2021,30(3):55-60.
WANG X H，LI H F，QIAN C F. Effect of structural parameters of metal spiral gasket on compression -rebound performance［J］.Computer aided engineering,2021,30(3):55-60.
［6］ 赵子毅.一种螺栓用钢高温力学性能研究［D］.上海：上海工程技术大学,2015.
ZHAO Z Y. A study of the bolt steel′s performancein high temperature[D].Shanghai:Shanghai University of Engineering Science,2015.
［7］ 黄苏.高温螺栓法兰连接系统温度场与密封性能研究［D］.武汉：武汉工程大学,2018.
HUANG S.Study on temperature field and sealing performance of bolted flange connection system at high temperature[D].Wuhan :Wuhan Institute of Technology,2018.
［8］ 李杜娟.高温下法兰连接紧密性分析［D］.西安：西安石油大学，2014.
LI D J. Analysis of flange connection tightness under high temperature［D］.Xi'an :Xi'an Shiyou University,2014.
［9］ 陈圆,关凯书,马凯,等.高温螺栓法兰连接系统的温度场及热损失分析［J］.华东理工大学学报(自然科学版),2015,
41(6):857-862.
CHEN Y, GUAN K S, MA K, et al. Analysis on temperature distribution and heat loss of bolted flamed connections at high temperature［J］.Journal of east China universitv of science and technology (Natural science edition),2015,41(6):857-862.
［10］ 喻九阳,王明伍,郑小涛，等.高温法兰连接系统温度场的有限元分析［J］.武汉工程大学学报，2014,30(10):31-36.
YU J Y,WANG M W,ZHENG X T, et al.Temperature field analysis of flanged joints at high temperature based on finite element method［J］.Journal of wuhan institute of technology,2014,30(10):31-36.
［11］ 吴晨辉.螺栓—法兰—垫片连接系统高温热紧的研究［D］.兰州：兰州理工大学，2020.
WU C H.Research on high temperature thermal tightness of bolt-flange-gasket connection system[D].Lanzhou: Lanzhou University of Technology,2020.
［12］ 金属材料拉伸应力松弛试验方法:GB/T 10120—2013［S］.
Metallic materials-Tensile stress relaxation-Method of test:GB/T 10120—2013[S].
［13］ 喻健良,闰兴清,罗从仁.高温下法兰系统温度分布及螺栓载荷变化［J］.压力容器,2013,30(11):1-7.
YU J L,RUN X Q,LUO C R.Temperature distribution and bolt load changes of flange system in high temperature［J］.Journal of pressure vessel technology,30(11):1-7.
［14］ 方晓璐.核电站不同型式高温法兰及密封计算分析研究［J］.液压气动与密封,2024,44(3):89-93.
FANG X L.Analysis and calculation on different types of high temperature flanges and seals for nuciear power plants［J］.Hydraulics pneumatics & seals,2024,44(3):89-93.
［15］ 章兰珠,毕乐文.考虑高温蠕变的螺栓和法兰材料的选配［J］．润滑与密封，2021，46(9):68－74．
ZHANG L Z,BI L W.Selection of bolt and flange materials with considering high temperature creep［J］.Lubrication engineering,2021,46(9):68-74.

相似文献/References:

[1]叶有俊,王志成,王一宁,等.基于修正Theta法的P92钢蠕变行为及寿命预测研究[J].石油化工设备,2020,49(06):1.[doi:10.3969/j.issn.1000-7466.2020.06.001]
　YE You-jun,WANG Zhi-cheng,WANG Yi-ning,et al.Research on Creep Behavior and Life Prediction of P92 Steel Based on the Modified Theta Projection concept Method[J].Petro-Chemical Equipment,2020,49(02):1.[doi:10.3969/j.issn.1000-7466.2020.06.001]

备注/Memo

备注/Memo:
收稿日期：2024-11-30
作者简介：宛张洪（2003-），男，湖北黄梅人，在读大学生，专业为过程装备与控制工程。
通信作者：蔡洪涛（1966-），男，湖北应城人，副教授，硕士，研究方向为石油化工设备的结构与强度。E-mail:1870058292@qq.com。
更新日期/Last Update: 2025-03-25