[1]韩风梅,戴风涛.汽轮机轴封结焦碰磨故障分析与控制[J].石油化工设备,2024,53(06):80-84.[doi:10.3969/j.issn.1000-7466.2024.06.015]
　HAN Feng-mei,DAI Feng-tao.Fault Analysis and Control of Coking and Rubbing in Steam Turbine Shaft Seals[J].Petro-Chemical Equipment,2024,53(06):80-84.[doi:10.3969/j.issn.1000-7466.2024.06.015]
点击复制

汽轮机轴封结焦碰磨故障分析与控制()
分享到：

石油化工设备[ISSN:1000-7466/CN:62-1078/TQ]

卷:
53
期数:
2024年06期
页码:
80-84
栏目:
经验交流
出版日期:
2024-11-15

文章信息/Info

Title:
Fault Analysis and Control of Coking and Rubbing in Steam Turbine Shaft Seals
文章编号:
1000-7466(2024)06-0080-05
作者:
韩风梅; 戴风涛
中国石油 独山子石化分公司 研究院，新疆 独山子 833699
Author(s):
HAN Feng-mei; DAI Feng-tao
Research Institute of Dushanzi Petrochemical Company，CNPC，Dushanzi 833699，China
关键词:
汽轮机; 振动; 轴封; 结焦; 碰磨; 控制
Keywords:
steam turbine; vibration; shaft seal; coking; rubbing; control
分类号:
TQ051.2
DOI:
10.3969/j.issn.1000-7466.2024.06.015
文献标志码:
B
摘要:
通过对某石化公司汽轮机振动异常波动进行监测分析，利用振动频谱图、轴心轨迹及轴心位置图，结合机组相关参数趋势变化，进行故障特征识别及故障机理分析。分析认为，汽轮机振动异常波动系轴封处泄漏的润滑油气在高温下结焦并附着在油封位置，结焦层达到一定厚度时突出部位与转子轴外径发生碰磨所致。采取调整氮封压力、提高轴封冷却风量及加设隔板等措施缓解了汽轮机振动波动，提出了汽轮机停机时的预防性维护措施，以避免设备故障的发生。
Abstract:
By monitoring and analyzing the abnormal vibration fluctuations of a certain petrochemical company's steam turbine，using vibration spectrum diagrams，axis trajectory and axis position diagrams，in association with the trend changes of relevant parameters of the unit，fault feature identification and fault mechanism analysis were conducted. The analysis indicates that the anomalous vibration of the steam turbine is attributable to the leakage of lubricating oil and gas at the shaft seal，which gives rise to the formation of coke at elevated temperatures and adherence to the oil seal position. Once a certain thickness of coke has accumulated，the protruding portion collides and rubs against the diameter of the rotor shaft. To mitigate the vibration experienced by the turbine，a series of measures were implemented，including adjustments to the nitrogen seal pressure，an increase in the cooling air volume for the shaft seal，and the addition of baffles. During the turbine shutdown，a set of preventive maintenance procedures were put forth to prevent potential equipment failure.

参考文献/References:

［1］ 李录平，邹新元，陈 荐，等.汽轮发电机组碰磨故障的典型特征研究［J］.振动、测试与诊断，2001（4）：49-53，64.
［2］ 张永军.汽轮机两种典型碰磨故障的比较分析［J］.山西电力，2018（2）：49-53.
［3］ 赵旭，吴峥峰，陆颂元.某汽轮机组动静碰磨非典型振动特征的分析与诊断［J］. 汽轮机技术，2009，51（6）：451-453.
［4］ 章鹏，杨振华，滕千里.背压式汽轮机动静碰磨原因分析与防范［J］.浙江电力，2022，41（3）：106-110.
［5］ 陆颂元.大型机组动静碰磨的振动特征及现场应急处理方法［J］.中国电力，2003，36（1）：6-11.
［6］ 刘亿鑫，赵新宇，赵志强，等.汽轮机汽封碰磨轴振问题的处理措施［J］.热力透平，2021，50（2）：135-138.
［7］ 张文斌，唐贵基，王维珍，等.大型汽轮机动静碰磨故障的诊断和处理综述［J］.煤矿机械，2005（1）：131-133.
［8］ 牟法海，卢盛阳，王文营.汽轮机动静碰磨故障的原因分析及处理［J］.热力发电，2007，36（3）：62-64.
［9］ 李录平，徐煜兵，贺国强，等.旋转机械常见故障的实验研究［J］.汽轮机技术，1998（1）：35-40.
［10］ 陆颂元.汽轮发电机组振动［M］.北京：中国电力出版社，2000：8-19.
［11］ 王广庭，王海明.汽轮机转子碰磨产生临时弯曲的处理方法研究［J］.湖北电力，2010，34（4）：23-25.
［12］ 宋为平.大型汽轮机转子碰磨振动特征分析［J］.百科论坛电子杂志，2021（9）：2988.
［13］ 王颖，李录平，陈尚年，等.基于运行参数相关分析的汽轮机组碰磨故障诊断方法及其应用［J］.汽轮机技术，2023，65（3）：207-213.
［14］ 肖增弘，华兴鲁，李子超.汽轮机转子运行故障分析及诊断研究［J］.机械设计与制造，2014（5）：233-236.
［15］ 戈志华，高金吉，王文永.旋转机械动静碰摩机理研究［J］.振动工程学报，2003（4）：38-41.

相似文献/References:

[1]肖 真.汽轮机汽缸结合面变形分析及激光熔覆修复[J].石油化工设备,2017,(03):51.[doi:10.3969/j.issn.1000-7466.2017.03.011]
　XIAO Zhen,Analysis of Steam Turbine Cylinder Joint Surface Deformation and Laser Cladding Repairing[J].Petro-Chemical Equipment,2017,(06):51.[doi:10.3969/j.issn.1000-7466.2017.03.011]
[2]周瑞均,董金善,张森源.聚合釜结构有限元静动态特性分析[J].石油化工设备,2021,(01):41.[doi:10.3969/j.issn.1000—7466.2021.01.008]
　ZHOU Rui-jun,DONG Jin-shan,ZHANG Sen-yuan.Finite Element Static and Dynamic Analysis of Polymer Vessel Structure[J].Petro-Chemical Equipment,2021,(06):41.[doi:10.3969/j.issn.1000—7466.2021.01.008]
[3]曾令旗,孙双双.高耸化工塔振动控制研究进展[J].石油化工设备,2021,(02):54.[doi:10.3969/j.issn.1000—7466.2021.02.008]
　ZENG Ling-qi,SUN Shuang-shuang.Research Progress on Vibration Control of the High-rise Chemical Tower[J].Petro-Chemical Equipment,2021,(06):54.[doi:10.3969/j.issn.1000—7466.2021.02.008]
[4]谢燕媚,仝保田,任兴杰,等.蜡油加氢装置加热炉炉管振动分析[J].石油化工设备,2021,(06):69.[doi:10.3969/j.issn.1000—7466.2021.06.013]
　XIE Yan-mei,TONG Bao-tian,REN Xing-jie,et al.Vibration Analysis for Furnace Tube of Heating Furnace in Wax Oil Hydrogenation Unit[J].Petro-Chemical Equipment,2021,(06):69.[doi:10.3969/j.issn.1000—7466.2021.06.013]
[5]米孜拉夫·麦麦提,秦 涛,陈 刚,等.汽轮机转子热弯曲及临界转速偏移故障分析及处理[J].石油化工设备,2021,(06):73.[doi:10.3969/j.issn.1000—7466.2021.06.014]
　MIZILAFU Maimaiti,QIN Tao,CHEN Gang,et al.Analysis and Treatment of Steam Turbine Rotor Thermal Bending and Critical Speed Deviation Fault[J].Petro-Chemical Equipment,2021,(06):73.[doi:10.3969/j.issn.1000—7466.2021.06.014]
[6]冯 俊,董金善,吴倩倩,等.不同倾斜角度热交换器振动特性流固耦合模拟及试验研究[J].石油化工设备,2022,(02):16.[doi:doi:10.3969/j.issn.1000—7466.2022.02.004]
　FENG Jun,DONG Jin-shan,WU Qian-qian,et al.Fluid-structure Interaction Simulation and Experimental Study on Vibration Characteristics of Heat Exchangers with Different Tilt Angles[J].Petro-Chemical Equipment,2022,(06):16.[doi:doi:10.3969/j.issn.1000—7466.2022.02.004]
[7]唐 帅,谢燕媚,王文超,等.高压聚乙烯装置增压机出口管线振动特性研究[J].石油化工设备,2022,(06):20.[doi:10.3969/j.issn.1000-7466.2022.06.004]
　TANG Shuai,XIE Yan-mei,WANG Wen-chao,et al.Study on Vibration Characteristics of Outlet Pipeline of Supercharger in High-pressure Polyethylene Unit[J].Petro-Chemical Equipment,2022,(06):20.[doi:10.3969/j.issn.1000-7466.2022.06.004]
[8]赵 耿,赵云浩.空塔横风向振动分析讨论[J].石油化工设备,2023,(01):40.[doi:10.3969/j.issn.1000-7466.2023.01.007]
　ZHAO Geng,ZHAO Yun-hao.Analysis and Discussion on Tower Vibration under Empty and Transverse Wind Condition[J].Petro-Chemical Equipment,2023,(06):40.[doi:10.3969/j.issn.1000-7466.2023.01.007]
[9]马维祥.固液两相流诱发变径及T型管道振动实验研究及数值模拟[J].石油化工设备,2023,(04):12.[doi:10.3969/j.issn.1000-7466.2023.04.003]
　MA Wei-xiang.Experimental Study and Numerical Simulation of Vibration of Variable Diameter and T-shaped Pipes by Solid-liquid Two-phase Flow[J].Petro-Chemical Equipment,2023,(06):12.[doi:10.3969/j.issn.1000-7466.2023.04.003]
[10]王瑞,徐凯勃,王为民,等.催化裂化装置液化石油气进料泵振动超标工艺处置和优化改造[J].石油化工设备,2024,53(06):69.[doi:10.3969/j.issn.1000-7466.2024.06.013]
　WANG Rui,XU Kai-bo,WANG Wei-min,et al.Process Treatment and Optimization Transformation for Excessive Vibration of Liquefied Petroleum Gas Feed Pump in Catalytic Cracking Unit[J].Petro-Chemical Equipment,2024,53(06):69.[doi:10.3969/j.issn.1000-7466.2024.06.013]

备注/Memo

备注/Memo:
收稿日期： 2024-05-31
作者简介： 韩风梅（1971-），女，新疆奎屯人，工程师，从事转动设备状态监测及故障诊断工作。E-mail：hanfengmei@petrochina.com.cn。
更新日期/Last Update: 2024-11-15